4 Suggestions For Choosing The Best Axe

4 Suggestions For Choosing The Best Axe

The modern axe has survived virtually unchanged from the primitive device that originated in prehistoric times. It basically consists of 2 components – the axe head (made of steel) and the handle (made of wood or fiberglass) and is mostly used for chopping or splitting timber. A number of the newer gransfors axes feature a one-piece cast steel construction. A brief description of the principle elements of an axe is as follows. The slicing edge of the head is called the bit or blade; the opposite end is called the poll or butt. Every side of the head is called the cheek. The cutting edge is beveled on each sides and is slightly curved. The handle or haft is mounted securely onto the head by way of an oval hole called the attention positioned close to the butt end. The handle is typically oval in cross-part and ranges from 20 inches to 36 inches in length. The majority of the handle is referred to as the belly. The deal with bows slightly in toward the blade on the throat near the tip to type the grip. The very bottom of the handle is called the knob.

Axe or Hatchet?

A primary distinction is made between an axe and a hatchet. The a lot larger axe is used for chopping timber and splitting lumber. A double bit axe has 2 chopping edges and is used mainly by skilled loggers. The smaller hatchet is designed to be used with one hand.

Hatchet: Definition and Use

The hatchet is a lighter, more compact model of the axe. The butt finish of a hatchet typically takes the form of a hammer head and is used for driving nails. The head can also have a nail slot for pulling nails. It is acceptable for driving roofing nails and for reducing, splitting and installing wood shakes or shingles. It's an important software for a roofer and is quite helpful to a carpenter. It can also be used when camping and for light out of doors work.

Types of Axes

Axes may be sub-divided into the following classes: a felling axe, a broad axe and a splitting maul. As the name implies, a felling axe is used for chopping against the grain as when felling trees. A broad axe has a large head and a broad blade that is flat on one side and beveled on the other. Prior to now it has been used for hewing rough timber but has been rendered out of date by trendy slicing tools. A splitting axe or splitting maul has a big heavy wedge-shaped head that's used for splitting wood along the grain. The maul works well with a dull blade and the butt finish can be utilized as a sledgehammer.

Safety Suggestions

Never use an axe or a hatchet if the head is just not securely fastened to the deal with or if the handle is cracked. Do not strike the butt finish of an axe with a hammer. Preserve the reducing edge of the axe sharpened and rust-free. Consider the material near the grip of the axe handle. When you think there might be slippage because of perspiration, you might need to wrap part of the deal with with electrical tape.