Dyer Vent Cleaning - Prevent A Fire By Cleaning Your Dryer Vent

Dyer Vent Cleaning - Prevent A Fire By Cleaning Your Dryer Vent

Do you know--- Only 60% of the lint is captured within the lint trap of residential and industrial garments dryers. The opposite 40% is vented outside. Over time, the damp lint accumulates to the inside of the duct. The outcome is like a clogged pipe that turns into more restricted over time which can cause a fire hazard! In keeping with the National Fire Safety Association, sixteen,000 fires begin in the laundry room each year.

Additionally, the Consumer Product Safety Commission estimates more than 84.four million in property damage annually. This is a reality that needs to be taken seriously. The State Fire Marshal recommends that your dryer vent be cleaned or inspected annually to make sure your safety.


Listed here are some signs your dryer vent may need cleaning:

If it takes longer than one cycle for your garments to dry, or the garments are highly regarded after drying, this is a good sign your vent wants cleaning.
If the clothes have a musty scent after drying.
If your dryer shuts off or stops during a cycle, the factor could also be getting too sizzling from the duct restriction.
If there may be a substantial amount of lint escaping from the back of the dryer.
If the outside vent has lint masking the outside of the vent cover.
Listed below are the benefits of a clean dryer vent:
Reduce laundry drying occasions
Avoid dryer ingredient substitute costs
Improve the standard of dried garments
Save money on utility payments
Stop a dryer fire!
So, how do you go about cleaning your dryer vent. Listed here are the steps should you plan to do it yourself.
1. Get the proper tools. For this job you will need a shop vac and extension hose of no less than 10 to 15 ft, depending on the size of the dryer vent outside to your dryer. Subsequent, you'll need a flexible cable with a brush on the end (can be found online) to snake by way of the duct, and finally, a mud mask and gloves to guard yourself from the airborne lint.

2. Disconnect your dryer from the versatile duct and clean the back of the dryer and any lint that has collected beneath the dryer. Check the flexible duct and exchange it with a new one if it is damaged or has holes. The first a part of the process will contain running the versatile cable and vacuum from the inside of the house by your dryer. The second part of the process entails the identical thing only from the outside by your dryer vent that goes to the outside.

3. Run the flexible snake with brush through the dryer vent duct as far as you may go, watch out not to push previous any turns or angles that might cause the cable to get caught within the ductwork, in any other case you should have a difficult time getting it out. Vacuum out the free lint with the shop vac and hose. Run the hose as far into the duct as you'll be able to go.

4. Find where your dryer vents to the outside of the house. Remove any dryer vent hardware to entry the duct.

5. Repeat the process from the outside, running your flexible cable into the duct (toward the dryer) and vacuum out the loose lint. Follow this by hooking the dryer vent cleaning services near me back up to the flexible duct inside the house and turn the dryer on, any remaining lint will blow out of the duct. Finally, replace any hardware on the outside of the house.